preflashed ESPhome Smart Plug Works With Home Assitant Israel Standard 16A

Notice: The plugs shipped after 24st Jan 2022 is upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed The measurement error octive power about 0.2% The measurement error of effective current is 0.5% The measurement error of effective voltage is 0.5% Officially Approved Made For ESPHome Israel Plug Pre configed IOs plug and play Build in ESP8285 chip with 2M flash Automatically detect on Home Assistant Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible. Specification Specification: *Input voltage：100-240VAC 50/60Hz *Current：16A(Max) Monitoring: Yes *Wireless standard：IEEE802.11b/g/n,2.4GHz *Housing Color：Whtie *Operation Temperature：-20℃～+50℃ *Plastic material:ABS+PC *Fire-protection rating:94-V0 How to set WiFI password of the plug Use your phone or computer search wireless until you find SSID named： Athom_xxxxxx ( xxxxxx will be address of your plug ) Then connect it After you connect it successfully, a setting window will automatically pop up. Then please input your router SSID and password. Then click save. then go to your Home Assitant It will shows new devices discovered, press continue to add it succesfully GPIOs: GPIO# Component GPIO0 None GPIO1 None GPIO2 None GPIO3 CSE7766 Rx GPIO4 None GPIO5 Button1 GPIO9 None GPIO10 None GPIO12 Relay1 GPIO13 Ledki GPIO14 None GPIO15 None GPIO16 None FLAG None The old version ( Shipped before 20th Jan 2022): GPIO# Component GPIO0 None GPIO1 None GPIO2 None GPIO3 Button1 GPIO4 BL0937 CF GPIO5 HLWBL CF1 GPIO9 None GPIO10 None GPIO12 HLWBL SELi GPIO13 Ledk GPIO14 Relay1 GPIO15 None GPIO16 None FLAG None For Yaml, Please visit: https://github.com/athom-tech/athom-configs